Incoming Calling Rules - AMX SIP Communications Gateway CSG-500 Operation/Reference Manual

Telephone System Configuration
Click Update to save your time interval definition, or Cancel to discard your changes. Click Apply Changes
to make the new time interval active. Once a time interval definition is created, you can either Edit or Delete
the definition from the Time Interval page.

Incoming Calling Rules

Incoming Calling Rules give you the ability to use basic pattern matching to route incoming calls based on
time intervals for each analog or VoIP trunk with which you receive inbound calls. Click Incoming Calling
Rules to access the Incoming Calling Rules page.
FIG. 39 Incoming Calling Rules
The main page displays the incoming calling rules created for each trunk. No rules are displayed if you have
just setup your CSG. Click New Incoming Rule to create a new incoming calling rule. The new incoming rule
form will be displayed.
FIG. 40 Incoming Calling Rules
There are only a few options you will need to define to create a new rule.
New Time Interval Page Options
Trunk
Time Interval
46
Select the trunk which the incoming rule should apply to from the
drop-down list. The trunk can be either an analog or VoIP trunk.
Select the time interval from the list available in the drop-down
list. You may have created time intervals for business hours,
weekend hours, holiday time, etc. You can also select None if you
want to bypass any time intervals or patterns.
CSG SIP Communications Gateway Operation/Reference Guide