Telephone System Configuration; Logging On To The Csg; Subsequent Logins To The Csg - AMX SIP Communications Gateway CSG-500 Operation/Reference Manual

Sip communications gateway
Hide thumbs Also See for SIP Communications Gateway CSG-500:
Table of Contents

Advertisement

Telephone System Configuration

This chapter provides information on how to initially set up your telephone system via the CSG Interface. The
CSG Interface gives you the ability to set up your telephone system without the need to use command line
configuration. After connecting to the CSG, the primary menu is displayed, giving you the ability to configure
your system, as well as add features to your call system as your needs change.

Logging On to the CSG

Your CSG should already be connected to an internet or network connection, as described in the Installing the
Hardware section on page 9. In the address field of a CSG supported web browser, enter the IP address
assigned to your CSG. The default LAN IP address is 192.168.69.1.
FIG. 9
CSG Interface Login
To log on to the system enter the following credentials:


The first time you log on you will be prompted to change your password from the default. You should have
already chosen a new password during the installation process. Once the log on process is complete the CSG
Interface home page will be displayed.

Subsequent Logins to the CSG

The method described above will work to log onto the configuration tool of the CSG. In addition, you
can log onto the CSG using the CSG's Network port once it has been enabled. In this case, open a web
browser on a computer which is located on the same network as the CSG. In the address field of the web
browser, enter the IP address of the CSG as defined during the initial installation.
CSG SIP Communications Gateway Operation/Reference Guide
Username: admin
Password: <password>
Telephone System Configuration
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Csg-544Csg-580Sg-500

Table of Contents