AMX SIP Communications Gateway CSG-500 Operation/Reference Manual page 59

The double left arrows will move all available users to this page/intercom group. The double right arrows will
remove all page/intercom group members. The single left arrow will be move an individual available user to
the page/intercom group. The single right arrow will remove an individual page/intercom group member.
Click Save to retain your page/intercom group, or Cancel to abandon your changes. From the Paging &
Intercom page, you can either Edit or Delete a page/intercom group.
Click Page an Extension along the top to configure a key sequence which initiates a page or intercom call to a
specific extension.
FIG. 44 Settings for Paging Individual Extensions
The following settings are available:
Page an Extension Options
Prefix for Paging
an Extension
Prefix for Dialing
an Extension as
intercom
Click Save to retain your changes, or Cancel to abandon them.
Then click Settings along the top to specify additional settings for paging and intercom.
FIG. 45 Paging & Intercom Settings
The following setting is available:
Settings Options
Alert-Info Header
Click Save to retain your changes, or Cancel to abandon them. Once you have completed making changes to
the Paging & Intercom sections, click Apply Changes to make them immediately available.
CSG SIP Communications Gateway Operation/Reference Guide
Specify the key sequence used to prefix a page call to a specific
extension. For example, setting this value to ** would allow you to
initiate a page call to extension 6000 by dialing **6000.
Specify the key sequence used to prefix an intercom call to a
specific extension, For example, setting this value to *# would
allow you to initiate an intercom call to extension 6000 by dialing
*#6000.
This is the value that is sent in the alert info header to the phone
for an intercom call. It is not recommended that this value be
changed from the default of Intercom.
Telephone System Configuration
51