AMX SIP Communications Gateway CSG-500 Operation/Reference Manual page 19

There are indicators on both the bracket and the mounting clips to show which end is the "top" to ensure
correct mounting orientation (see FIG. 5).
The bracket has a notched side to indicate the top of the piece. The DIN mounting
clips also have two holes drilled in the top portion of the clips that indicate the top of
the clip.
Bracket
FIG. 5
AC-DIN-CS3 - Clip/Bracket assembly (attach to CSG)
FIG. 6 illustrates the correct mounting orientation of the DIN Rail Mounting Bracket:
This notch indicates
the top of the bracket
DIN Rail
(35mm)
(mounts to the CSG)
FIG. 6
AC-DIN-CS3 DIN Rail Mounting Bracket - mounted on a DIN rail
CSG SIP Communications Gateway Operation/Reference Guide
Notch indicates top of the bracket
Drilled holes indicate
top of the clip
DIN Mounting Clips
(2 per bracket)
Bracket
These two holes indicate
the top of the mounting
clips
DIN Mounting Clip
attached to the bracket
(2 clips per bracket)
Installation
11