Adding Voip Trunks - AMX SIP Communications Gateway CSG-500 Operation/Reference Manual

Adding VoIP Trunks

If you do not have a subscription with one of the VoIP providers listed above, or you have a special VoIP setup,
you can add a custom VoIP trunk. Click the VoIP Trunks tab to add a VoIP (SIP or IAX) service provider. The
Create New SIP/IAX Trunk page will be displayed.
FIG. 18
Create New SIP/IAX Trunk Definition
Fill in the initial SIP/IAX trunk definition with the following information:
Create New SIP/IAX Trunk Page Options
Option
Type
Provider Name
Username/
Password
Click Add once you have completed your definition, or Cancel to discard your changes.
Once you have added a VoIP trunk it will appear in the SIP/IAX trunks list. There are Edit and Delete buttons
associated with each VoIP trunk listing. Click Edit to further refine your trunk definition.
FIG. 19 Edit VoIP Trunk
CSG SIP Communications Gateway Operation/Reference Guide
Description
Select either the SIP or IAX protocol:
• SIP - Identifies that the trunk sends and receives calls using the
VoIP protocol SIP.
• IAX - Identifies that the trunk sends and receives calls using the
VoIP protocol IAX.
The hostname or IP address assigned to the VoIP provider or
server.
You will need to provide your log on credentials to the VoIP trunk
server.
Note: If your VoIP trunk does not require a username, you may
leave the username field blank.
Telephone System Configuration
25