Configuring Voice Vlan Properties; Configuring Telephony Oui - Cisco SF200-24 Administration Manual

VLAN Management
Voice VLAN
STEP 1
STEP 2
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
Configuring Voice VLAN
This section describes how to configure voice VLAN. It contains the following
topics:
•

Configuring Voice VLAN Properties

• Displaying Auto Voice VLAN Settings
•

Configuring Telephony OUI

Configuring Voice VLAN Properties
Voice VLAN Properties
Use the
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
Click VLAN Management > Voice VLAN > Properties. The
opens.
• The voice VLAN settings configured on the switch are displayed in the Voice
VLAN Settings (Administrative Status) block.
• The voice VLAN settings that are actually being applied to the voice VLAN
deployment are displayed in the Voice VLAN Settings (Operational Status)
block.
Enter values for the following fields:
• Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
Changes in the voice VLAN ID, CoS/802. 1 p, and/or DSCP will cause
NOTE
the switch to advertise the administrative voice VLAN as a static voice VLAN.
Auto Voice VLAN Activation
If the option
is selected, then the default values need to be maintained.
• CoS/802.1p —Select a CoS/802. 1 p value that will be used by LLDP-MED as
a voice network policy. Refer to
MED Network Policy
page for the following:
triggered by external Voice VLAN
Administration > Discovery > LLDP > LLDP
for additional details.
12
Properties
page
176