Cisco SF200-24 Administration Manual page 215

Configuring Multicast Forwarding
MLD Snooping
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
To enable MLD Snooping:
Click Multicast > MLD Snooping. The
Enable or disable MLD Snooping Status. When MLD Snooping is globally
enabled, the device monitoring network traffic can determine which hosts have
requested to receive Multicast traffic. The switch performs MLD Snooping only if
both MLD snooping and Bridge Multicast filtering are enabled.
Select a VLAN, and click Edit. The
Enter the parameters.
• VLAN ID—Select the VLAN ID.
• MLD Snooping Status—Enable or disable MLD snooping on the VLAN. The
switch monitors network traffic to determine which hosts have asked to be
sent Multicast traffic. The switch performs MLD snooping only when MLD
snooping and Bridge Multicast filtering are both enabled
• Operational MLD Snooping Status—Displays the current status of MLD
Snooping for the selected VLAN.
• MRouter Ports Auto-Learn—Enable or disable Auto Learn for the Multicast
router.
• Query Robustness—Enter the Robustness Variable value to be used if the
switch cannot read this value from messages sent by the elected querier.
• Operational Query Robustness—Displays the robustness variable sent by
the elected querier.
• Query Interval—Enter the Query Interval value to be used by the switch if
the switch cannot derive the value from the messages sent by the elected
querier.
• Operational Query Interval—The time interval in seconds between General
Queries received from the elected querier.
• Query Max Response Interval—Enter Query Max Response delay to be
used if the switch cannot read the Max Response Time value from General
Queries sent by the elected querier.
• Operational Query Max Response Interval—Displays the delay used to
calculate the Maximum Response Code inserted into the General Queries.
MLD Snooping
page opens.
Edit MLD Snooping page opens.
15
206