Switch Models - Cisco SF200-24 Administration Manual

General Administrative Information and Operations

Switch Models

STEP 3
Switch Models
NOTE
Smart Switch Models
Model Product ID
Name (PID)
SG200-18 SLM2016T
SG200-26 SLM2024T
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
• Custom Login Screen Settings—If you want text to be displayed on the
Login
page, enter the text in the Login Banner text box. Click Preview to
view the results.
When the user defines a login banner from the web interface, it also
NOTE
activates the banner for the CLI interfaces (Console, Telnet, and SSH).
Click Apply to set the values in the Running Configuration file.
All models can be fully managed through the web-based switch configuration
utility.
Layer 2 is the default mode of operation for all devices. In Layer 2 mode, the
switch forwards packets as a VLAN aware bridge. In Layer 3 mode, the switch
performs both IPv4 routing and VLAN aware bridging.
When the switch operates in Layer 3 mode, the VLAN Rate Limit, and QoS policers
are not operational. Other QoS Advanced mode features are operational.
Fast Ethernet (10/100) ports are designated as FE and Gigabit Ethernet ports (10/
100/1000) are designated as GE in the table below.
Acronyms used for port descriptions have varied across software versions. In
release 1.0, 'e' was used for fast Ethernet, 'g' for 'gigabit Ethernet' in the GUI.
The following table describes the various models, the number and type of ports
on them and the number of ports that support PoE.
Description of Ports on Device
16 GE ports + 2 GE special-purpose combo
ports
24 GE ports + 2 GE special-purpose combo-
ports
Power No. of Ports
Dedicated that Support
to PoE PoE
6
46