Cisco SF200-24 Administration Manual page 129

Smartports
Built-in Smartport Macros
STEP 4
Built-in Smartport Macros
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
Smartport Application of the interface is Auto Smartport. Enabling Persistent
at an interface eliminates the device detection delay that otherwise will
occur.
• Macro Parameters—This block displays the parameter values of the
Smartport macro applied or to be applied to the interface.
• Reset—If an interface is in Unknown status (as a result of an unsuccessful
macro application), set it to Default and reapply the last macro that was run
on it.
Click Apply to update the changes and assign the Smartport type to the interface.
The following describes the pair of built-in macros for each Smartport type. For
each Smartport type there is a macro to configure the interface and an anti macro
to remove the configuration.
Macro code for the following Smartport types are provided:
• desktop
• printer
• guest
• server
• host
• ip_camera
• ip_phone
• ip_phone_desktop
• switch
• router
• ap
9
121