Multiple Devices Attached To The Port - Cisco SF200-24 Administration Manual

Smartports
Auto Smartport
NOTE
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
Table 2 CDP Capabilities Mapping to Smartport Type (Continued)
Capability Name
Two-Port MAC Relay
Table 3 LLDP Capabilities Mapping to Smartport Type
Capability Name
Other
Repeater IETF RFC 2108
MAC Bridge IEEE Std 802. 1 D
WLAN Access Point IEEE Std 802. 1 1
MIB
Router IETF RFC 1812
Telephone IETF RFC 4293
DOCSIS cable device IETF RFC 4639
and IETF RFC 4546
Station Only IETF RFC 4293
C-VLAN Component of a VLAN Bridge
IEEE Std 802. 1 Q
S-VLAN Component of a VLAN Bridge
IEEE Std 802. 1 Q
Two-port MAC Relay (TPMR) IEEE Std
802. 1 Q
Reserved
If only the IP Phone and Host bits are set, then the SmartPort type is
ip_phone_desktop.

Multiple Devices Attached to the Port

The switch derives the SmartPort type of a connected device via the capabilities
the device advertises in its CDP and/or LLDP packets.
CDP Bit Smartport Type
0x400 Ignore
LLDP Bit Smartport Type
1 Ignore
2 Ignore
3 Switch
4 Wireless Access
Point
5 Router
6 ip_phone
7 Ignore
8 Host
9 Switch
10 Switch
11 Ignore
12-16 Ignore
9
111