Configuring Voice Vlan; Configuring Voice Vlan Properties - Cisco Small Business 200 Administration Manual

VLAN Management
Voice VLAN
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide
Step 7 and Step 8 are optional as they are enabled by default.
NOTE
Workflow2: To configure the Telephony OUI Method
Open the VLAN Management > Voice VLAN > Properties page. Set Dynamic Voice
VLAN to Enable Telephony OUI.
If the device is currently in Auto Voice VLAN mode, you must disable
NOTE
it before you can enable Telephony OUI.
Configure Telephony OUI in the Telephony OUI page.
Configure Telephony OUI VLAN membership for ports in the Telephony OUI
Interface page.

Configuring Voice VLAN

This section describes how to configure voice VLAN. It covers the following
topics:
•

Configuring Voice VLAN Properties

• Displaying Auto Voice VLAN Settings
• Configuring Telephony OUI
Configuring Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
12
186