Cisco SF200-24 Administration Manual page 22

Small business 200 series smart switch
Hide thumbs Also See for SF200-24:
Table of Contents

Advertisement

Viewing Statistics
Managing RMON
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
The statistics are displayed for the selected interface.
Bytes Received (Octets)—Number of octets received, including bad
packets and FCS octets, but excluding framing bits.
Drop Events—Number of packets that were dropped.
Packets Received—Number of good packets received, including Multicast
and Broadcast packets.
Broadcast Packets Received—Number of good Broadcast packets
received. This number does not include Multicast packets.
Multicast Packets Received—Number of good Multicast packets received.
CRC & Align Errors—Number of CRC and Align errors that have occurred.
Undersize Packets—Number of undersized packets (less than 64 octets)
received.
Oversize Packets—Number of oversized packets (over 1518 octets)
received.
Fragments—Number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received.
Jabbers—Total number received packets that were longer than 1632
octets. This number excludes frame bits, but includes FCS octets that had
either a bad FCS (Frame Check Sequence) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number.
A Jabber packet is defined as an Ethernet frame that satisfies the following
criteria:
-
Packet data length is greater than MRU
-
Packet has an invalid CRC
-
Rx Error Event has not been detected
Collisions—Number of collisions received. If Jumbo Frames are enabled,
the threshold of Jabber Frames is raised to the maximum size of Jumbo
Frames.
Frames of 64 Bytes—Number of frames, containing 64 bytes that were
received.
Frames of 65 to 127 Bytes—Number of frames, containing 65-127 bytes
that were received.
2
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents