Cisco 250 Series Get To Know

Get To Know Your Switch
This chapter contains the following sections:
•
•
•
•
•
•
•

Introduction

Thank you for purchasing the Cisco 250 Series Switch. The Cisco 250 Series Switches are the next generation
of affordable smart switches that combine powerful network performance and reliability with a complete suite
of network features that you need for a solid business network. These expandable Fast Ethernet or Gigabit
Ethernet switches, with Gigabit or 10-Gigabit uplinks, provide multiple management options, rich security
capabilities, and Layer-3 static routing features far beyond those of an unmanaged or consumer-grade switch,
at a lower cost than fully managed switches. With an easy-to-use web user interface, Smart Network
Application, and Power over Ethernet Plus capability, you can deploy and configure a complete business
network in minutes.
Before You Begin
Before you begin installing your device, ensure that the following items are available:
• RJ-45 Ethernet cables for connecting network devices. A category 6a and higher cable is required for
• Console cable for using the console port to manage your switch.
• Tools for installing the hardware.
Introduction, on page 1
Rack Mounting Switch, on page 2
Power over Ethernet Considerations, on page 3
Front Panel, on page 4
Configuring Switches, on page 5
Product Models, on page 8
Navigation, on page 9
10G ports; a category 5e and higher cable is required for all other ports.
• The rack-mount kit packed with the switch contains four rubber feet for desktop placement, and
two brackets and twelve screws for rackmounting.
• If the supplied screws are lost, use replacement screws in the following size:
• Diameter of the screw head: 6.9 mm
Get To Know Your Switch
1