Copying Configuration Files - Cisco SF200-24 Administration Manual

Managing System Files

Copying Configuration Files

!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
Unless the Running Configuration is copied to the Startup Configuration or another
configuration file, all changes made since the last time the file was copied are lost
when the switch is rebooted.
The following combinations of copying internal file types are allowed:
• From the Running Configuration to the Startup Configuration or Backup
Configuration.
• From the Startup Configuration to the Backup Configuration.
• From the Backup Configuration to the Startup Configuration.
• From the Mirror Configuration to the Startup Configuration or Backup
Configuration.
To copy one configuration from one file type to another file type:
Click Administration > File Management > Copy/Save Configuration. The
Save Configuration
page opens.
Select the Source File Name to be copied. Only valid file types are displayed.
(The file types are described in the
Select the Destination File Name to be overwritten by the source file.
Click Apply. The file is copied.
Files and File Types
4
Copy/
section.)
31