Lldp Med Protocol - Cisco SF200-24 Administration Manual

Configuring Discovery
Configuring LLDP
STEP 3
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
- 802.3 Link Aggregation—Whether the link (associated with the port on
which the LLDP PDU is transmitted) can be aggregated. It also indicates
whether the link is currently aggregated, and if so, provides the
aggregated port identifier.
- 802.3 Maximum Frame—Maximum frame size capability of the MAC/
PHY implementation.
The following fields relate to the Management Address:
• Advertisement Mode—Select one of the following ways to advertise the IP
management address of the switch:
- Auto Advertise—Specifies that the software would automatically
choose a management address to advertise from all the IP addresses of
the product. In case of multiple IP addresses the software chooses the
lowest IP address among the dynamic IP addresses. If there are no
dynamic addresses, the software chooses the lowest IP address among
the static IP addresses.
- None—Do not advertise the management IP address.
- Manual Advertise—Select this option and the management IP address to
be advertised.
• IP Address—If Manual Advertise was selected, select the Management IP
address from the addresses provided.
Enter the relevant information, and click Apply. The port settings are modified, and
the Running Configuration file is updated.
LLDP MED
LLDP Media Endpoint Discovery
the following additional capabilities to support media endpoint devices. Some of
the features of the LLDP Med Network Policy are:
• Enables the advertisement and discovery of network polices for real-time
applications such as voice and/or video.
• Device location discovery to allow creation of location databases and, in the
case of Voice over Internet Protocol (VoIP), Emergency Call Service (E-911)
by using IP Phone location information.
(LLDP-MED) is an extension of LLDP that provides
7
59