Mira DISCOVERY Installation And User Manual page 27

8. Align the Green Temperature Hub
with the Lever Retainer Clips as
illustrated.
9. Slide the Flow Lever Adapter over
the Cartridge and onto the yellow
lugs on the Flow Control, exactly as
illustrated.
10. Push the Flow Lever onto the
Flow Lever Adapter (align lugs as
illustrated).
11. Push the Grey Control Bearing over
the Lever Retainer.
Note! Align the Grey Control Bearing
with the Lever Retainer Clips and not
the Flow Control Lever.
12. Refer to section 'Commissioning',
for maximum temperature setting and
temperature knob assembly.
Flow
Lever
Adapter
Flow Lever
Grey Control Bearing
27
Green Temperature Hub
Lever Retainer Clips
Lever Retainer
Clips