Mira DISCOVERY Installation And User Manual page 23

2.3 Mark the positions of the Fixing
Screw holes on the wall.
2.4 For solid walls drill two 6 mm holes
for the Wall Plugs.
2.5 Insert the Wall Plugs (supplied) and
attach the Shower Control to the wall
with the Securing Screws provided.
Note! For stud partition installations
alternative fixings may be required
(not supplied) to fix the shower
control to the rear face of the wall
cavity or to a timber noggin.
2.6 Refer to section: '1. Solid Wall or
Stud Partition (Using Securing
Brackets - Mounting off Front
Face)' and follow steps 1.10 to
1.18.
Rear Fixing
Point
Hot Supply
23
Outlet Pipe to
Fittings
Securing
Screw
Cold Supply