Mira DISCOVERY Installation And User Manual page 21

1.14 Attach the Building-in Shroud to
the Shower Control using the two
Securing Screws.
1.15 Using the 'Finished Wall Indicator'
on the Building-in Shroud as a guide,
finish the wall.
Caution! Make sure that the
finished wall is within the maximum
and minimum limits or the control
components will not fit correctly.
1.16 Remove the Building-in Shroud.
Retain the two Securing Screws for
fitting the Backplate.
1.17 Fit the Shower Fittings, refer to your
Fittings Installation and User Guide
for instructions.
1.18 Fit the Concealing Plate and Control
Assembly, refer to section: 'Control
Assembly'.
Maximum /
Minimum Limits
21
Finished Wall F9802
Min
Max