Installation Methods
Exposed Discovery Shower Control
The Exposed Discovery Shower Control
can be installed with Rear, Rising or Falling
Supply Inlets.
For Rear Entry Supplies, go to section:
'Exposed Shower Control, 1. Rear
Supplies'.
For Rising or Falling Supplies, go to
section: 'Exposed Shower Control, 2.
Rising or Falling Supplies'.
Built-in Discovery Shower Control
The Built-in Discovery Shower Control
can be installed using Rear Fixing Points
on the Body, or by using the Securing
Brackets (supplied) on the Front Face of a
Solid Wall or Stud Partition, or on the Rear
Face of a Laminated Panel.
For installation into a Solid Wall or Stud
Partition using the Securing Brackets,
go to section: 'Built-in Shower Control,
1. Solid Wall or Stud Partition (Using
Securing Brackets - Mounting off Front
Face)'.
For installation into a Solid Wall or
Stud Partition using the Rear Fixing
Points, go to section: 'Built-in Shower
Control, 2. Solid Wall or Stud Partition
(Using Rear Fixing Points on Shower
Control)'.
For installation behind a Laminated Panel
using the Securing Brackets, go to section:
'Built-in Shower Control, 3. Laminated
Panel (Using Securing Brackets -
Mounting off Rear Face)'.
Rear Fixing
Points
Securing Brackets
(Rear Face)
14
Securing Brackets
(Front Face)