Connecting By Entering An Ssid And Password - Panasonic HC-W580 Operating Instructions Manual

Connecting with QR code
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5
Start up the smartphone application "Image App".
6
On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations.
Control this unit remotely with the smartphone.
For information on how to exit [Remote Ctrl], refer to page 143.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the "Image App", and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.
≥ When the QR code cannot be scanned, refer to "Connecting by entering an SSID and Password".
(l 175)
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j

Connecting by entering an SSID and Password

1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Turn on the Wi-Fi function in the smartphone's setup menu.
4
On the smartphone's Wi-Fi setting screen, select the SSID displayed on this
unit.
5
Enter the Password displayed on this unit's screen on the smartphone.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
(l 144)
- 175 -