Materials - NTI ST-C6HD-LA-L-300M Installation And Operation Manual

NTI XTENDEX 300 Foot HDMI and IR Extender

MATERIALS

Materials Included with ST-C6HD-300 kit:
NTI ST-C6HD-300 Local Unit
NTI ST-C6HD-300 Remote Unit
1-100VAC to 240VAC at 50 or 60Hz-24VDC/1.0A AC Adapter
1- Power Cord- country specific
This manual
Additional Materials Included with ST-C6HD-IR-300 kit:
3 Foot IR-EMITTER (IR-EMTR-3)
3 Foot IR-RECEIVER (IR-RCVR-3)
Additional Materials Included with Modular Local Unit:
3 Foot IR-EMITTER (IR-EMTR-3) (Models with dual HDMI include 2pcs of IR-EMITTER)
Additional materials may be required but are not supplied:
CAT5e solid/stranded UTP ; 6/6a solid UTP; CAT7 solid STP (CATx) twisted-pair cables terminated with RJ45 connectors
wired straight thru- pin 1 to pin 1, etc. (see page 14 for proper EIA/TIA 568 B wiring method)
Note: Use only CAT7 solid STP cable if the extender is a rackmount module (i.e. ST-C6HD-LA-L-300M).
HDMI male-male cable to connect a HDMI source or display (Order NTI # HD-xx-MM where xx=3, 6, 9,14,20,30, 50,75,100
and 150 foot cable).
DVI-D male to HDMI-A male single link cable to connect a DVI source or display (Order NTI # DVI-HD-xx-MM where xx=3, 6,
10, or 15 foot cable)
3.5mm Stereo plug male-to-male cable to connect stereo audio source or self-powered stereo speakers.
(Order NTI# SA-xx-MM where xx= 3, 6, 10 or 15 foot cable)
Always use the shortest possible cable for best performance.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.
2