Before Operations - JVC KW-AVX810 Instructions Manual

Before operations
Touch panel
--++
Monitor panel -
·'''~G \ -
d!!!S: ... \
~
_ : Buttons on the touch panel
In the explanation, they are
indicated inside [ ].
For details on the touch panel
operations, see each source operation
section.
Features
of the
illumination _
Monitor panel buttons
The lights ofthe monitor panel buttons are turned off
when no operation is done for about 10 seconds.
Screen
While the unit is turned on, you can also turn off the
screen by holding DISP on the monitor panel.
They are turned on again in the following cases:
- When you touch the touch panel or move your hand
nearby*
- When you use the remote controller
- When acalllText Message comes in (for Bluetooth
cellular phone)
l~.o
\
\ I::::J O.NO 0
CJ c===J
CJ
YJ
r
* Depending on the <Illumination> setting.
(I@"
page
62)
The lights of the monitor panel buttons are always
turned on in the folloWing cases:
- While AV menu screen is displayed.
- While
<Source Menu>
screen is displayed.
- While
<OpenlTilt>
menu is displayed.
- When
<Illumination>
is set to
<Normal>.
(I@"
page 62)
5
The screen is turned on again in the following cases:
- When you touch the touch panel
- When you press MENU, DISP, DETACH, orOPEN on the
monitor panel
- When acall1Text Message comes in (for Bluetooth
cellular phone)
- When the signal from the rear view camera comes in
INTRODUCTION
I