JVC KW-AVX810 Instructions Manual page 61

( The procedure for setting an item is shown on page 57. )
Selectable settings, [reference pagel
When playing back amulti-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby Surr. : Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo: Normally select this.
You can enjoy apowerful sound at alow volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to alwa suse this function.
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
US: When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/1 0kHz.
Europe: When using in any other areas. FM/AM intervals are set to 50
kHz (100 kHz during auto search)/9 kHz.
SA: When using in South American countries where FM interval is 100
kHz. AM interval is set to 10kHz.
Your SIRIUS identification number appears on the monitor.
You can determine the use of LINE IN and VIDEO IN terminals.
~
[52]
Off: Select when no component is connected ("AV-IN" is skipped while
selecting the source).
iPod (Off): Select when connecting the iPod using the USB Audio and
Video cable for iPod. ~ [48]
Audio&Video: Select when connecting an AV component such as aVCR.
Audio: Select when connecting an audio component such as aportable
audio player.
Navigation: Select when connecting aNavigation System.
*2
Selectable only for "DISC "SO", and "USB." (Playback stops when you change the setting.)
*3
Appears only when an HO Radio tuner box is connected.
*4
Appears only when aSIRIUS Satellite Radio is connected.
*5
Not selectable when "A V-IN" is selected as the source.
61
SETIINGS