Using The Bluetooth Cellular Phone - JVC KW-AVX810 Instructions Manual

Using the Bluetooth cellular phone _
IGi'
page 38
-++--
Bluetooth icon lights
up when the adapter
is connected.
-++--
*1
iii!!: .,
~B
I - ""
.1,':
l=o:":JV:,,:,c:,,O~-==-':==::::::::::=""'::::::::::"'1J
*2
Adjusts the volume of the incoming calls.*3
Selects the registered device
("NEW DEVICE" appears when anew device can be registered.)
Hold: Activates <Voice Dialing> function
Displays
<Dial Menu>
screen.
[....
~l
Sound mode
(1Gi'
page 55)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
*1
When acellular phone with audio function is connected,
I
appears.
*2
This button appears when the Bluetooth Adapter is connected.
*3
This adjustment does not affect the volume level ofthe othersources.
o
•
• •
Press [SOURCE], then press [Bluetooth PHONE].
(1Gi'
page 11)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Press[~].
• You can also use MENU on the monitor panel.
Press [Bluetooth].
Establish the connection with adevice, then make acall (or settings using <Bluetooth>
menu).
(1Gi'
pages 64 and 65)
When acall comes in•••
The source is changed to "Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(1& page65)
When <Auto Answer> is deactivated•••
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
<.9/1
IATT orVOl +1-).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
<.9/1
IATT
or VOL
+1-).
• You can adjust the microphone volume. (1& page 65)
36