Environmental Protection; Plug Replacement - Titan SF210JSL Safety And Operating Manual

ENVIRONMENTAl PROTECTION

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk

PlUG REPlACEMENT

The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
blue ---Neutral
brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter N.
The wire that is coloured brown must be
connected to the terminal that is marked with the
letter L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 13 AMP fuse must be fitted.
BLUE
N (NEUTRAL)
OUTER
SLEEVE
8" Laser sLiding Compound mitre saw
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
sF210JsL