Environmental Protection - Titan TTB689CSW Safety And Operating Manual

MINI CIRCULAR SAW 500W TTB689CSW
- Regularly check to see if any dust or foreign matter
has entered the grills near the mobrush to remove any
accumulated dust.
- If the body of the tool needs cleaning, wipe it with a
soft damp cloth. A mild detergent can be used but noth-
ing like alcohol, petrol or other cleaning agent.
- Never use caustic agents to clean plastic parts.
- Lubricate all moving parts at regular intervals.
- Periodically clean the laser generator from sawdust.
- Periodically check all fixings. These could become
loose with time due to vibration.
- In case of excessive sparking the carbon brushes
should be checked by a qualified electrician. Important:
The carbon brushes shall only be removed or replaced
by a qualified electrician.
STORING
Store the machine, operating instructions and where
necessary the accessories in the original packaging.
In this way you will always have all the information and
parts ready to hand.
Pack the device well or use the original packaging in
order to avoid transit damage.
Always keep the machine in dry place.

ENVIRONMENTAL PROTECTION

This product is marked with the selective
sorting symbol on waste electrical and elec-
tronic equipment. This means that this product
should not be disposed of with household
waste but must be supported by a collection
system in accordance with Directive 2012/19/
EU. It will then be recycled or dismantled to
minimize impacts on the environment, electrical
and electronic products are potentially hazard-
ous to the environment and human health due
to the presence of hazardous substances.
22