Lipton Brewed Iced Tea Training, Installation, & Service Manual
Note: If the urn filler tube is being used it will need to be cleaned per these
instructions.
Daily System Flush (Hot Water Rinse) Procedure
WARNING: This unit dispenses HOT water (160° F. - 205°
F. (71°C. - 96°C.)) during the rinse cycle.
Press the RINSE key to place the brewer in the rinse cycle mode. In this mode the
brewer will require user intervention to initiate each flush of hot water through the
system. This is done by opening the spigot when prompted to do so on the display.
After the rinse is completed, the brewer automatically returns to run mode.
630460171
- 32
May 7, 2002