SET TIME mode
SETTING THE TIME AND DATE
1. Press MENU until ENTER SET TIME? is displayed.
2. Press (#) key to enter SET TIME and press (>) to advance.
3. Press the (#) key to enter SET CLOCK?. Read the flash screens.
Press (>) or (<) key to move the cursor. Press (+) or (-) keys to
change settings. Press (#) key twice to save new settings.
Setting the RINSE TIME
Contact the manager or the "decision maker" of the restaurant. Request a
time of the day when the brewer will be cleaned. Recommend a time when
they open the restaurant in the morning. This time should be when they nor-
mally clean their dispensing equipment, or when there are no customers at
the restaurant, or a slow time of the day.
1. Press the (#) key to enter SET RINSE TIME?. Read the flash
screens. Press (>) or (<) key to move the cursor. Press (+) or (-)
keys to change settings. Press (#) key twice to save new settings.
2. Press (#) twice to save the rinse time.
3. Press the (#) key to exit SET TIME.
ADJUST STRENGTH mode
1. Press MENU until ENTER STRENGTH? is displayed.
2. Press (#) to enter and (>) to advance.
3. Read the flash screens. Press (+) or (-) key to change strength settings.
Press (+) or (-) keys to change settings. The allowed adjustment range in
this screen is +/-5% of the installed strength. Each press of the (+) or (-)
keys will change the tea strength by 1% until the 5% maximum change is
reached.
4. Press (>) to advance and (#) to exit.
SERVICE mode
1. Press MENU until ENTER SERVICE? is displayed.
2. To enter Press and hold the STOP key and then press the RUN key.
3. Press (>) to advance to the following sub-modes.
May 7, 2002
Lipton Brewed Iced Tea Training, Installation, & Service Manual
- 9
630460171