Utilities Menu; Postscript Menu - Lexmark MS410 series User Manual

Understanding the printer menus

Utilities menu

Use
Format Flash
Yes
No
Activate Hex Trace
Coverage Estimator
Off
On
XPS menu
Use
Print Error Pages
Off
On

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
To
Format the flash memory.
Warning—Potential Damage: Do not turn off the printer while the flash memory is
being formatted.
Notes:
•
Flash memory refers to the memory added by installing a flash memory card in
the printer.
•
Yes deletes all data stored in the flash memory.
•
No cancels the format request.
•
The flash memory option card must not be read/write‑ or write‑protected.
•
This menu item appears only when a non‑defective flash memory card is
installed.
Isolate the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
• To exit or deactivate Hex Trace, restart the printer.
Provide an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
To
Print a page containing information on errors, including XML markup errors.
Note: Off is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
77