Pcl Emul Menu - Lexmark MS410 series User Manual

Understanding the printer menus
Use
Font Priority
Resident
Flash

PCL Emul menu

Use
Font Source
Resident
Download
Flash
All
Font Name
Courier 10
Symbol Set
10U PC‑8
12U PC‑850
PCL Emulation Settings
Point Size
1.00–1008.00
To
Establish the font search order.
Notes:
•
Resident is the factory default setting.
•
This menu item is available only when a formatted flash memory card is
installed and operating properly.
•
Make sure the flash memory card is not read/write‑, write‑, or
password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used by the Font Name menu.
Notes:
•
Resident is the factory default setting. This shows the factory default set
of fonts downloaded in the RAM.
•
Download shows all the fonts downloaded in the RAM.
•
Flash shows all fonts resident in that option. The optional flash memory
card must be properly formatted and cannot be read/write‑, write‑, or
password‑protected.
•
All shows the fonts available to any option.
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. This shows the font name, font
ID, and the storage location in the printer. The font source abbreviation is R
for Resident, F for Flash, and D for Download.
Specify the symbol set for each font name.
Notes:
•
10U PC‑8 is the U.S. factory default setting. 12U PC‑850 is the
international factory default setting.
• A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific program, such as math symbols for scientific text. Only the
supported symbol sets are shown.
Change the point size for scalable typographic fonts.
Notes:
•
12 is the factory default setting.
•
Point size refers to the height of the characters in the font. One point
equals approximately 0.014 inch.
•
Point sizes can be increased or decreased in 0.25‑point increments.
78