Uwatec Aladin PRIME Operating Manual page 43

VIII Settings
Selecting 24 hours or AM/PM setting
Adjusting the date
Date (24 h setting)
Day / Month / Year
Date (AM/PM setting)
Month / Day / Year
Adjusting the LCD contrast
Selecting the IrDA speed
VIII UWATEC Aladin dive computers
® ®
1. Confirm that you wish to change the setting by pushing
"off" starts to flash.
2. Switch with between "on" (AM/PM) and "off" (24 h).
3. Confirm the setting with
The 24 h - AM/PM setting influences the display of the date (see next page).
1. Confirm that you wish to adjust the date by pushing
The first day (month) starts to flash.
2. Set the day (month) by pushing
3. Confirm the setting with
4. Set the month (day) by pushing
5. Confirm the setting with
6. Set the year by pushing
7. Confirm the setting with
1. Confirm that you wish to adjust the LCD contrast by pushing
The current setting starts to flash.
2. Set the contrast by pushing
Low contrast: (1), high contrast: (12)
3. Confirm the setting with
The default setting is high. If you have problems to establish a reliable IrDA
connection, select "low".
1. Confirm that you wish to change the IrDA speed by pushing
(low) or "hi" (high) starts to flash.
2. Switch with between low and high.
3. Confirm the setting with
Low: 9600 bits / second
.
or .
. The month (day) starts to flash.
or .
. The year starts to flash.
or .
.
or .
.
.
High: max. 57 600 bits / second
VIII
. "On" or
.
.
. "Lo"
43