Uwatec Aladin PRIME Operating Manual page 38

VII Logbook
Dive time
Maximum depth
DEPTH DEPTH DIVE DIVE TIME TIME
CNS O %
2
Lowest temperature
Further possible information about the dive:
Too fast ascent*
S S
L L
O O
W W
Ignored decompression stop*
DECO DECO
STOP STOP
Ignored decompression stop*
TEC Diving in SOS mode (gauge mode)
Altitude range
TEC MB level dive (L1-L5)
TEC Ignored MB level stop*
STOP STOP
gets you back to the dive list (first level screen within logbook). From here you can advance to
the next dive of interest and press
Statistic information
DEPTH DEPTH DIVE TIME DIVE TIME
S S
L L
O O
W W
Leaving the logbook
38
Lowest battery performance
during the dive
Duration of surface interval
(only with repetitive dives)
CNS value at the
end of the dive
to retrieve more information about that dive etc.
From the time of day display you can get the following statistic information
over all dives. Push
Deepest dive
Longest dive
Cumulative bottom time
Number of dives
By pushing once or twice
The logbook closes automatically after 3 minutes without operation.
If a dive is started within adaptation time (after a
change of altitude), the adaptation time is dis-
played instead of the surface interval.
DESAT Desaturation was reset before the
dive (in "set 1")
DESAT Desaturation was reset before the
dive by removing the battery
Battery quality factor has been 3
bars or less during the dive
TEC Diving in gauge
AVG TEC Average depth (gauge mode)
NO
Microbubble warning after the dive
, and :
you can exit the logbook.
*Alarms during the dive
VII UWATEC Aladin dive computers
® ®