Diving With Aladin; Terminology / Symbols; General Terminology / Display During No-Stop Phase; Display During Decompression Phase - Uwatec Aladin PRIME Operating Manual

III Diving with Aladin

1 Terminology / Symbols

The information on the display of Aladin

1.1 General terminology / Display during no-stop phase

Oxygen toxicity
CNS O %
2
Ascent rate
(Only while
ascending)
%
Current depth
In metres (feet)
DEPTH DIVE TIME
NO STOP
CNS O %
2
Maximum depth
Maximum depth
reached during
the dive

1.2 Display during decompression phase

Decompression stop
All required decompression
stops must be observed.
DEPTH DIVE TIME
NO
DECO
STOP
CNS O %
2
Decompression
stop depth
Deepest stage is
displayed.
Decompression stop
duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
III UWATEC ® Aladin ® dive computers
®
® varies depending on the kind of dive and the dive phase.
TEC For information about diving with microbubble levels (MB level) see chap-
ter V ->30.
O % Mix
2
Selected oxygen
fraction
Time
Dive time
Duration of
the dive (min)
Nitrogen loading
bar
No-stop time
Remaining time
at a given depth
26.2 m
during which ascent
is allowed without
decompression
stop (min).
2x Time of day
Temperature
Time
35.7 m
No-stop range
Total ascent time
Including decompression
stops in minutes.
No-stop phase
Dive phase during which surfacing is allowed
without stop.
Current depth
Maximum depth
37 min. Dive time
Elapsed bottom time
Temperature
Total ascent time to surface (7 min)
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
24min
No-stop time
3 m
Deepest
6 m
decompression
stop depth
2 min
Decompression
stop duration
Decompression range
III
15