Dive Planner; Planning A No-Stop Dive - Uwatec Aladin PRIME Operating Manual

Table of Contents

Advertisement

VI Dive planner
Aladin
has a dive planner which allows the planning of no-stop dives. TEC The dive planner allows
®
planning of decompression dives.
Basis of the planning:
WARNING

1 Planning a no-stop dive

To select the dive planner Aladin
until the symbol for the dive planner
Select dive planner
or
until
if
NO
Enter the

dive planner

if rep. dive
DEPTH
DEPTH
DIVE TIME
NO STOP
No-stop time or
MB no-stop time
Set desired depth
(
and
Icon for microbubble
level L1-L5
VI UWATEC
®
Aladin
®
dive computers
• selected fraction of oxygen and MOD
• TEC selected water type
• TEC selected microbubble level
• water temperature of the most recent dive
• altitude range (if any)
• status of saturation at the time the dive planner is selected
• assuming a normal workload of the diver and observance of the prescribed
ascent rates
If two or more divers using computers are planning a dive, planning for all
divers has to be based on the dive computer showing the shortest no-stop
times. Failure to do this may lead to serious injury or death from decompres-
sion sickness.
®
must be in user mode (time of day display). Push
appears. (The dive planner cannot be selected in gauge mode.)
NO
NO
Dive planner icon
CNS O
%
2
Input of the surface
interval by pushing
/
Confirm with
With
and
stop time.
TEC If a microbubble level has been selected (L1-L5), the MB no-stop time
is shown.
Depths deeper than the MOD for the selected gas (O
)
On page 26 you will find further information and safety considerations
NO
regarding the microbubble warning.
The microbubble warning and its duration are dis-
NO
played if Aladin
®
detects an increased risk due to the
accumulation of microbubbles.
Microbubble warning
(Do Not Dive)
Duration of the
warning
Enter the dive planner with
The input window for the time interval is displayed
if there was a remaining desaturation (DESAT) befo-
re the dive planner has been selected. This surface
interval between now and the beginning of the dive
can be changed with
15 minutes. Aladin
and the altitude section to which you may not rise
at the end of the selected surface interval.
If a microbubble warning (no dive) and its duration
NO
has been displayed, Aladin
rounded up to the next 15 minutes – as surface
interval. If the proposed interval is shortened, the
microbubble warning appears.
the displayed interval (if applicable).
set the depth for which you want to know the no-
or
.
and
in steps of
®
displays the CNS O
2
®
proposes this time –
mix) are not displayed.
2
VI
% value
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aladin tec

Table of Contents