Overview Aladin ® Settings - Uwatec Aladin PRIME Operating Manual

3 Preparation for the dive
3.4 Overview Aladin ®
Configure Aladin ® according to your needs.
Setting
• Setting the gas mixture and TEC MOD
• TEC Setting the MB level
• TEC Gauge mode
• TEC Altimeter
The following settings may be changed with "set 1" (->39) or SmartTRAK:
• TEC Depth alarm
• TEC Dive time alarm
• TEC Safety stop duration
• TEC Maximum partial pressure of
oxygen (ppO )
2 max
• Time limit to reset the O
• Unit system
• TEC Water type
• TEC Backlight illumination duration
• Audible attention signals
• Audible attention signals
• Water contacts
• Reset desaturation
The following settings may be changed with "set 2" (->42) or SmartTRAK:
• Alarm clock
• UTC zone
• Time of day
• 24 or AM/PM setting
• Date
• LCD contrast
• IrDA speed (not possible with SmartTRAK)
• Sound
• Show Aladin ® serial number
III UWATEC ® Aladin ® dive computers
settings
Range
21-50% O
L0-L5
on / off
5 - 100 m (20 - 330 feet) on/off
5-195 min., on/off
1-5 min.
1.2-1.6 bar
% mix to air no reset / 1 - 48 hrs.
2
metric/imperial
on (salt water)/off (fresh water)
2-12 sec.
on / off
SmartTRAK: selective
on / off
on / off
0 - 23 h 59 min., on/off
±13 hrs., increments: 15 min.
hours:minutes
24 (off) / AM/PM (on)
1 (low) -12 (high)
low / high
on / off
TEC 21-100% O
2, 2
III
Default / Page
Setting in
Aladin ®
PRIME
21% O ->18
2
L0 ->32
off ->28
->39
40m (130ft), off ->39
60 min., off ->39
3 minutes ->40
1.4 bar ->40
no reset ->40
->40
on (salt water) ->40
6 sec. ->40
on ->41
on
on ->41
no reset ->41
12:00, off ->42
0:00 ->42
GMT ->42
->43
->43
1 (low) ->43
high ->43
on ->44
->44
19