Uwatec Aladin PRIME Operating Manual page 41

Table of Contents

Advertisement

VIII Settings
Switching the audible attention signals on and off
Switching the water contacts on and off
Resetting the remaining saturation
DESAT T
DESA
DESAT T
DESA
VIII UWATEC
Aladin
dive computers
®
®
With this option you can switch off the audible attention signals only (the
audible alarms remain active). Refer to page 17 to see this distinction.
1. Confirm that you wish to change the setting of the audible attention signals
by pushing
. "On" or "off" starts to flash.
2. Switch between "on" or "off" by pressing
3. Confirm the setting with
On submerging in water the water contacts switch on Aladin
WARNING
1. Confirm that you wish to change the setting of the water contacts by pushing
. "On" or "off" starts to flash.
2. Switch between "on" or "off" by pressing
3. Confirm the setting with
WARNING
If you dive after resetting the remaining saturation the computer will mis-
calculate your decompression, which may result in serious injury or death.
Reset the remaining saturation only if you know you will not be diving,
flying or going to higher altitude for the next 48 hours.
Resetting the desaturation should only be done when there is a valid reason,
e.g. loaning the computer to somebody who has not dived in 48 hours or
more. When the computer itself has remaining saturation you must assume full
responsibility for the consequences of resetting the remaining saturation.
1. Confirm that you wish to reset the displayed saturation by pushing
"On" starts to flash.
2. Switch between "on" or "off" by pressing
3. Confirm the setting with
"000" appear.
4. Set the first digit by pushing
Repeat point 4 for the next 2 digits. If you entered the right code the desatu-
ration will be reset to zero (desat off)
Code: 313
.
If you chose the option „Water contacts off",
Aladin
®
will turn on with a delay of up to 1 minute
into the dive. This will affect functioning of the
computer.
Make sure that the computer is on before starting
the dive.
.
Diving after a reset of the remaining saturation
may lead you into potentially hazardous situations
which could result in death or serious injury.
After a reset of the remaining saturation do not
dive for at least 48 hours.
. If you have selected "off", "code" and
and
.
®
automatically.
.
.
. Confirm with
.
VIII
.
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aladin tec

Table of Contents