Table of Contents
Advertisement
electrolux en:tice barbecue activating wheel brake/configuration of hotplate and grills/operating instructions 23
Activating the wheel brake
For safety, the wheel brake should be activated to
prevent any movement of the barbecue.
There are 2 wheel brakes.
wheel brakes
To activate:
•
Push down until it locks.
Options for configuration
of hotplates and grills
important
Grills can be placed
together on one side and
hotplate on the other.
Grills can be placed
either side of hotplate.
This is the preferred
option for roasting.
Operating instructions
Control functions
Before lighting the barbecue:
•
Check that all hoses and gas fittings are tight.
•
Open the roasting hood.
•
Check all control knobs are in the 'OFF' position.
•
Ensure that the cooking surfaces are clean.
•
Turn the gas isolation valve 'ON'.
Lighting instructions
•
Do not attempt to light burners with roasting hood closed.
•
Read instructions before lighting.
•
To light a burner, depress the knob and rotate to 'HIGH'.
•
If the burner did not light, turn the knob to the 'OFF'
position. Allow gas to disperse, then repeat lighting
procedure.
Manual lighting
•
If, in the event of the automatic ignition system
not working, the barbecue can be lit manually.
•
A match holder with attached chain is fixed to
the inner panel of the left door.
Location of
match holder for
manual lighting
•
To light manually, unclip match holder and fit a 40mm
match to the holder and light. Pass match through
viewing slots below the front of the cooking plate down
towards the burner, then rotate the control knob to
HIGH to ignite. If ignition fails, turn the control valve
OFF and allow several minutes for the gas to disperse
before attempting to light again.
pass match holder
through viewing slot at
front under cooking plates
•
Once alight, repeat for other burners as required.
Advertisement
Table of Contents
