Mitsubishi Electric FR-S500 Series Instruction Manual page 9

Basic configuration
3) Single-phase 100V power input
Motor
Output Applied Inverter
(kW Type
(HP))
0.1
FR-S510WE-0.1K-NA
(1/8)
0.2
FR-S510WE-0.2K-NA
(1/4)
0.4
FR-S510WE-0.4K-NA
(1/2)
0.75
FR-S510WE-0.75K-NA
(1)
*1. • Select the NFB according to the inverter power supply
capacity.
• Install one NFB per inverter.
*2. For installations in the United States or Canada, the circuit breaker must be inverse
time or instantaneous trip type.
*3. The power factor may be slightly lower.
*4. When the breaker on the inverter primary side trips, check for the wiring fault (short
circuit), damage to internal parts of the inverter, etc. Identify the cause of the trip,
then remove the cause and power on the breaker.
*5. The single-phase 100V power input model does not allow the DC reactor to be fitted.
No-fuse Breaker
(NFB *1, 4) or
Contactor
Earth Leakage
Circuit Breaker
(ELB) (*2, 4)
30AF/10A
30AF/15A
30AF/20A
30AF/30A
4
Magnetic
AC Reactor(*3)
(MC) FR-HAL-
(Refer to
FR-BAL-
page 17)
S-N10 0.75
S-N10 1.5
S-N20,
2.2
S-N21
S-N20,
3.7
S-N21
DC Reactor (*5)
K FR-HEL- K
K FR-BEL- K




NFB INV IM
NFB INV
IM