3.Generate And Bind The Db2 Helper Program - IBM High Performance Storage System HPSS Installation Manual

Makefile.macros:
BUILD_PLATFORM = AIX
BUILD_TOP_ROOT = /opt/hpss
KRB5_AUTH_SUPPORT=on
UNIX_AUTH_SUPPORT=on
LDAP_AUTH_SUPPORT=off
GSI_AUTH_SUPPORT=off
CONVERSION_FROM_45 = off
CONVERSION_FROM_51 = off
BUILD_UNSUPPORTED = off
MVR1_PROGRAM_NAME = $(LOCAL_BIN)/hpss_mvr_tcp
MVR1_OPTIONS
# MVR2_PROGRAM_NAME = $(LOCAL_BIN)/hpss_mvr_ssd
# MVR2_OPTIONS
# MVR3_PROGRAM_NAME = $(LOCAL_BIN)/hpss_mvr_omi
# MVR3_OPTIONS
# MVR4_PROGRAM_NAME = $(LOCAL_BIN)/hpss_mvr_dd2
# MVR4_OPTIONS
Makefile.macros.AIX:
PVR_LIST
AIX_JAVA_ROOT
DB_INSTALL_PATH = /usr/opt/db2_08_01
LDAP_INSTALL_PATH
KRB5PATH
GSIPATH
Makefile.macros.LINUX:
PVR_LIST
LINUX_JAVA_ROOT = /usr/java/j2sdk1.4.2_05
DB_INSTALL_PATH = /opt/IBM/db2/V8.1
LDAP_INSTALL_PATH
KRB5PATH
GSIPATH
4. Log on as hpss.
5. Issue the "make clobber" command.
6. Issue the "make" command.
5.8.1.3. Generate and Bind the DB2 Helper Program
When filesets are created or updated, it is sometimes necessary to make entries in both the global and
the subsystem database. When updating both of these databases, it is very important that the update
be performed atomically. So, to accomplish an atomic update, a DB2 helper program is created. This
DB2 helper program is 'run' by DB2 whenever it needs to perform an atomic update of the global and
subsystem databases when creating or updating a fileset.
To generate this DB2 helper program and bind it to DB2 a script named hpss_db2_bindall.ksh is
provided.
Whenever the base source tree is rebuilt, perform the follow steps to generate and bind the DB2
helper program:
HPSS Installation Guide
Release 6.2 (Revision 2.0)
= ""
= "SSD"
= "OMI"
= "DD2"
= operator
= /usr/java14
= /usr/ldap
= /usr/local
= /usr/gt2
= operator
= /usr/ldap
= /usr/local
= /usr/gt2
July 2008
173