Since SSM now represents the three Core Server volume structures as a
single structure, the types specified to the hpssadm volume command have
changed. The 5.1 types:
Disk Storage Map Information
•
Disk Physical Volume Information
•
Disk Virtual Volume Information
•
have been replaced in 6.2 by the single type:
CS Disk Volume
•
Similarly, the 5.1 types:
Tape Storage Map Information
•
Tape Physical Volume Information
•
Tape Virtual Volume Information
•
have been replaced in 6.2 by the single type:
CS Tape Volume
•
The hpssadm volume command now supports volume import and export,
resource creation and deletion, and cartridge moves.
On the Active Storage Classes window, the "Force Migrate" has been
replaced with a "Migration Controls" drop-down allowing the
Administrator or Operator to perform migration operations on all the
selected storage classes. Likewise, the "Force Purge" has been replaced
with a "Purge Controls" drop-down allowing the Administrator to perform
purge operations on all the selected storage classes.
The "-ds" option is no longer available for the ssm "info" or "shutdown"
commands. A new option "-sm" is available for the "info" command.
The hpssadm config command now supports the additional structures:
Class of Service Config
•
Storage Class (but not subsystem-specific storage class options)
•
Global Config
•
Accounting Policy
•
Location Policy
•
All server configurations; servers which were not supported before are
•
the core server, gatekeeper, location server, log daemon,
migration/purge server, pvl, all pvrs, and ssm. The mover, log client
and startup daemon are still supported as previously.
A new hpssadm command "task" displays the status of any long running
background tasks submitted during the session, such as imports or resource
creates.
HPSS Installation Guide
Release 6.2 (Revision 2.0)
Changes since 5.1
July 2008
Server
GUI
ADM
n
n
n
n
n
n
n
32