IBM High Performance Storage System HPSS Installation Manual page 145

4. Select the "Configure Authorization Service" checkbox. Set the "Authorization Service" to
"Unix and config files".
5. Review and modify (if necessary) the active fields:
Local Site Name. The value is usually set to the full machine name of the local host
•
which can be determined using the 'hostname' and 'domainname' commands.
Local Realm Name. The value is usually set to the "Local Site Name" all
•
capitalized.
Local Realm ID. The field is set to a unique ID number for each site. Ask your
•
support representative for your site's value.
6. By default, the system's configuration files (/etc/passwd, /etc/group, and /etc/shadow) are
used to administer the authentication and authorization services. As an option, the HPSS
configuration files can be used instead. These files are created by mkhpss as part of this
HPSS Installation Guide
Release 6.2 (Revision 2.0)
July 2008
145