IBM High Performance Storage System HPSS Installation Manual page 275

SubStanza
SubStanza
Substanza
SubStanza
SubStanza
SubStanza
HPSS Installation Guide
Release 6.2 (Revision 2.0)
FTP Access File = <value>
Value: filename
E.g. FTP Access File = myftpaccess
Replaces -F<string> option.
Optional SubStanza setting the {FTP_FtpAccessFile}. Default:
ftpaccess. Located in the directory {FTPBaseDir}/etc.
Disable Slash Home Directory
E.g. Disable Slash Home Directory
Replaces -Z option.
Optional SubStanza disabling use of / as the user's home directory.
Normally, this should be active for Security reasons.
Disable Access if no Home Directory
E.g. Disable Access if No Home Directory
Replaces -H option.
Optional SubStanza disallowing login for users whose home directory
does not exist or is not properly configured. The default behavior is to put
the user in the "/" directory. Normally, this should be active for Security
reasons.
Disable Hints
E.g. Disable Hints
Replaces hpss_option HINTS off in ftpaccess.
Optional SubStanza disabling the sending of hints to the Core Server.
(HPSS only.) Not recommended.
Allow Trusted Hosts Authentication
E.g. Allow Trusted Hosts Authentication
Replaces -I option.
Optional SubStanza to permit us of the Trusted Hosts File. Note: this is
STRONGLY Discouraged. (HPSS only.)
HPSS FTP Principal = <value>
Value: Appropriate HPSS Principal Name
E.g. HPSS FTP Principal = hpssftp
Replaces -P option and hpss_option PRINC name in ftpaccess.
Optional SubStanza specifying the HPSS principal representing hpssftp.
(HPSS only.)
July 2008
275