IBM High Performance Storage System HPSS Installation Manual page 260

Stanza (CMPD)
SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
HPSS Installation Guide
Release 6.2 (Revision 2.0)
PFTP Client = {
E.g. PFTP Client = {
Optional Reserved Stanza specifier.
Must be terminated with a matching "}"
SYSLOG Facility = <value>
Values: DAEMON, LOCAL0 ... LOCAL7
E.g. SYSLOG Facility = LOCAL2
Optional SubStanza specifying the Syslog Facility for the MultiNode
Daemon
Debug Value = <value>
Values: 0 – 3
E.g. Debug Value = 1
Optional SubStanza specifying the Level of Debugging for the Parallel
FTP Client. Larger number provides more information.
Authentication Mechanism = <value>
Values: USER_PASS (Default), GSS, IDENT
E.g. Authentication Mechanism = GSS
Optional SubStanza specifying the preferred Client Authentication
mechanism. NOTE: this should be GSS if Kerberos Credentials are to
be used.
Default COS = <value>
E.g. Default COS = 99
Optional SubStanza specifying the default Class of Service if not
explicitly specified by the user. Use with caution – standard procedure
is to allow the Core Service to determine the optimal COS!
Protocol = <value>
Values: PDATA_AND_MOVER (Default), PDATA_ONLY,
PDATA_PUSH
E.g. Protocol = PDATA_ONLY
Optional SubStanza specifying the default protocol. May contain any of
the three protocols supported.
July 2008
260