IBM High Performance Storage System HPSS Installation Manual page 276

SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
HPSS Installation Guide
Release 6.2 (Revision 2.0)
FTP Principal Keytab File = <value>
Value: Pathname/Filename
E.g. FTP Principal Keytab File = /var/hpss/etc/hpss.keytabs
Optional SubStanza specifying the keytab containing the FTP principal.
Allow Passive Connections
E.g. Allow Passive Connections
Replaces -A option.
Optional SubStanza enabling passive connections. Note: Not supported in
the HPSS parallel FTP daemon for parallel operations. Client requests to
use passive mode will be rejected.
Sleep for Debugger = <value>
E.g. Sleep for Debugger = 5
Replaces -z option.
Optional SubStanza specifying the number of seconds for the HPSS PFTP
Daemon to sleep at initialization. Useful when attempting to attach to the
daemon with the debugger. NOTE: leaving this active will cause
significant degradation to the PFTP service!
Must Have Credentials
E.g. Must Have Credentials
Replaces -a option.
Optional SubStanza mandating authentication with Kerberos credentials,
disabling{Username}/{Password} authentication. This also disables the
user command.
Use Channel Bindings
E.g. Use Channel Bindings
Optional Kerberos allows for extra security by using channel bindings in
credentials. This has been turned off; but can be reset by includion of this
option.
Special Features Enabled
E.g. Special Features Enabled
Optional Substanza for Performance Testing ONLY. Should NOT be
active except by appropriate personnel. Default is Off.
Allow CCC Command
E.g. Allow CCC Command
Optional Kerberos option not relevant to the HPSS PFTP Daemon.
July 2008
276