IBM High Performance Storage System HPSS Installation Manual page 261

SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
HPSS Installation Guide
Release 6.2 (Revision 2.0)
Auto Parallel Size = <value>
Value: Size - May be specified as a decimal number or "xMB" style
notation.
E.g. Auto Parallel Size = 4MB
Optional SubStanza specifying the minimum file size to start using the
"auto-parallel" features of the PFTP Client.
PortRange = <value>
Value: ncadg_ip_tcp[StartPort-EndPort]
E.g. PortRange = ncadg_ip_tcp[10100-12100]
Optional SubStanza specifying the TCP port range to use between the
PFTP Client and the Mover(s). This may be necessary when Port Range
Filters are used for Security.
Parallel Block Size = <value>
Value: Size - May be specified as a decimal number or "xMB" style
notation.
E.g. Parallel Block Size = 512KB
Optional SubStanza specifying the size of the data blocks to be used for
parallel data transfers.
Transfer Buffer Size = <value>
Value: Size - May be specified as a decimal number or "xMB" style
notation.
E.g. Transfer Buffer Size = 16MB
Optional SubStanza specifying the PFTP Buffer sizes.
Socket Buffer Size = <value>
Value: Viable Socket Size - May be specified as a decimal number or
"xMB" style notation.
E.g. Socket Buffer Size = 16MB
Optional SubStanza specifying the Pdata Socket Buffer sizes.
MAX Ptran Size = <value>
Value: Size - May be specified as a decimal number or "xMB" style
notation.
E.g. MAX Ptran Size = 4GB
Optional SubStanza specifying a larger transfer size between socket
open and closure. For disk COSs, the segment sizes may potentially
override this specification!
July 2008
261