Upgrade Aix; Install Or Upgrade Java; Save Current Hpss Code And Configuration Files; Prepare Hpss 6.2 Code - IBM High Performance Storage System HPSS Installation Manual

6.3.5. Upgrade AIX

This step cannot be performed while the HPSS 4.5 or 5.1 system is running.
This section applies to site that are upgrading to HPSS 6.2 from both HPSS 4.5 and HPSS 5.1. See
Section 3.3.2: Prerequisite Summary By HPSS Node Type on page 59 for the the appropriate version
of AIX required for HPSS 6.2. This step should be performed on all systems used with HPSS 6.2.

6.3.6. Install or Upgrade Java

This step can be performed while the HPSS 4.5 or 5.1 system is running.
See Section 3.3.2: Prerequisite Summary By HPSS Node Type on page 59 for the the appropriate
version of Java required for HPSS 6.2. Perform this step for the root subsystem only.

6.3.7. Save Current HPSS Code and Configuration Files

This step should not be performed while the HPSS 4.5 or 5.1 system is running.
After the prerequisite software has been installed, perform the following for each root and non-root
subsystem:
1. Logon as root user
% su -
2. Save the installed HPSS 4.5 or 5.1 code, where xx = 45 or 51.
% cd /opt
% mv hpss hpss_xx
% mkdir hpss
3. Save the HPSS 4.5 or 5.1 /var/hpss directory and its contents, where xx = 45 or 51.
% cd /var
% cp -pR hpss hpss_xx
4. Copy the 4.5 or 5.1 mkhpss' state files, if they exist
% cd /var/hpss
% cp -p /opt/hpss_xx/config/mkhpss.data* .
% cp -p /opt/hpss_xx/config/hpss_unmake* .

6.3.8. Prepare HPSS 6.2 Code

Install and if necessary compile the HPSS 6.2 distribution image.
HPSS Installation Guide
Release 6.2 (Revision 2.0)
July 2008
194