IBM High Performance Storage System HPSS Installation Manual page 284

sizes in the range [1MB, 2MB).
PFTP Daemon Stanza Example:
PFTP Daemon = {
# Allow the Daemon to take Core Dumps
; Allow Core Files
# Directory to put core files in (Default = .)
; Core File Directory = /var/hpss/adm/core
# Specify the SYSLOG facility to use for all syslog messages
# except Authentication Messages.
# Values: DAEMON, LOCAL<0-7>
# Replaces -sstring option.
SYSLOG Facility = LOCAL0
# Disable Transfer Agent Support - Default is on
# HPSS PFTP Server explicitely sets to disabled
; No Transfer Agent Support
# Specify if the KDC registry is to be used as opposed to the
# passwd file.
; Use the KDC Registry
# Specify the Base Directory for PFTP Files
; FTP Base Directory = /var/hpss
# Specify the name of the ftpaccess file
# This becomes {BaseDir}/etc/{ftpaccess} based on the FTP Base
Directory
; FTP Access File = ftpaccess
# Do NOT allow / to be Home Directory (HPSS Only)
Disable Slash Home Directory
# Terminate session if Home Directory does NOT Exist (HPSS Only)
Disable Access if no Home Directory
# Disable the Sending of Hints to the Core Server (HPSS Only)
; Disable Hints
# Permit use of the Trusted Hosts File (HPSS Only)
; Allow Trusted Hosts Authentication
# What Principal to use for HPSS FTP (HPSS Only)
; HPSS FTP Principal = hpssftp
# Specify the Keytab containing the FTP principal
; FTP Principal Keytab File = /var/hpss/etc/hpss.keytab
# Allow both Active and Passive Connections (HPSS Only)
; Allow Passive Connections
# Delay for xx seconds to allow dbx attach to the Daemon.
; Sleep for Debugger = 5
# For Credentials-based PFTP, Deny username/password authentication
; Must Have Credentials
# For Credentials-based PFTP, Use the Channel Bindings
; Use Channel Bindings
# Allow the CCC Command to the GSS Daemon (non-HPSS Only)
# This allow for the Control channel to be in cleartext
; Allow CCC Command
# Set the IO Buffer Size for the HPSS PFTP Daemon
; PFTP IO Buffer Size = 1MB
# Specify the Level of Debugging Desired.
; Debug Value = 1
# For non-Parallel Transfers, specify the Interface (by Name)
# to use between the PFTP Daemon and the Movers (HPSS Only)
# Replaces -h option and "hpss_option HOST name" in ftpaccess
; Non-Parallel HostName = aixrahe.sandia.gov
# Specify the Port to be used for Manual PFTP Daemon Startup
; PFTP Debug Port = 6666
# Specification in seconds for the Default Timeout
HPSS Installation Guide
Release 6.2 (Revision 2.0)
Default = DAEMON
"Use Extended Registry Attributes" are specified
July 2008
284