Selecting Single Channel Or 4 Channel Motion Recording; Configuring Video Motion Detection - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Selecting Single Channel or 4 Channel motion recording

Use the Mode menu to select between single
channel and 4 Channel motion recording.
When single channel recording is activated, the
monitor will switch to the camera that detects
motion and record from that channel only.
4 Channel recording will record the entire
screen during Quad mode (4-way-split). Videos
files recorded during 4 Channel recording will
start with the letter Q.
To select 4 Channel or single channel
recording:
1 Press , then select Recording and press
OK.
2 Select Motion Record and press OK.
3 Select Mode and press OK.
4 Select 4 Channel recording or Single Channel
recording and press OK.
5 Press until all menus are closed.
Quad mode must be selected to use 4 Channel
recording. To select Quad mode, press
repeatedly.

Configuring video motion detection

Video motion detection looks for changes in video
images (frames) to detect motion. Video motion
detection allows for motion detection beyond the
range of the PIR sensors.
The drawback to video motion detection is that it
can be falsely triggered by changes in lighting
conditions or trees moving in the wind. You can
disable video motion detection or configure the
sensitivity using the menus.
For a description of the two motion detection
technologies used by the system, see "Motion
recording" on page 19.
REC
4 Channel recording
Recording
21