Table of Contents
Advertisement
Mounting the LCD receiver
Mounting the LCD receiver
The LCD Receiver can mounted to a wall or underneath a counter or cupboard.
To mount the LCD receiver:
1
Select a location to mount the receiver. The location should have a clear reception to your
camera(s). Place the mounting stand in the desired mounting position and mark holes for the
screws.
NOTE: Avoid installing in a location which requires the wireless signal to pass through
cement, concrete, and metal structures. This will reduce the range of transmission.
2
Drill the holes, and then mount the stand to the desired surface using the provided screws.
Make sure all three screws are fastened tightly at the connection points.
3
Adjust the antenna on the LCD receiver to allow for proper clearance with your mounting
surface.
Attach the LCD receiver to the mounting stand. Adjust the position of the LCD receiver, and
4
then tighten the thumbscrews to secure.
58
Thumbscrew
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WIRELESS HOME MONITORING SYSTEM and is the answer not in the manual?
Questions and answers