Changing The Camera View On Skype - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

My Skype Account Information
"Personal" Skype account
(e.g. Tom Smith)
Skype Name:
Password:
Email address used to register this
account
(used for account retrieval):

Changing the camera view on Skype

NOTE: This section is applicable only if you have more than 1 camera.
You cannot change the camera remotely using Skype; however, you can change the camera
that is shown on Skype manually using the video monitor.
Pair the camera that is most important for you to view remotely to Channel 1. When you
connect the USB cable to the video monitor, the video monitor defaults to Camera 1, even if
you have a different channel selected.
To change the camera view:
1 With the wireless receiver connected to your computer using a USB cable, press UP/DOWN to
change the channel that is shown when a remote user connects through Skype.
NOTE: You can only view one camera at a time.

USB PC CAMERA MODE
cam 1
Viewing your camera remotely using Skype™
"Camera" Skype account
(e.g. Lorex Camera)
Skype Name:
Password:
Email address used to register this
account
(used for account retrieval):
Press UP/DOWN to change the channel that
will be shown through Skype

51